8/16/32 Mbyte- 2/4/8 Mx32- 26-1004-XX Series

1st TECH Corporation

Architecture:
Type :
Last Update:

FLASH FlashFile_Component
SIMMs
8/23/96 10:13:00 AM

Vendor Information

Tool Description:

The 1st TECH 26-1004-XX and 26-1005-XX families of 80 pin flash memory SIMM modules provide compact industry standard non-volatile memory in modular upgradable form. The series includes 8, 16, 32 and 64 Mbyte versions, each utilizing the latest in Intel Flash memory technology. The necessary VPP for programming is generated internally.
Options are available that provide a reset signal to protect data during power transitions, or allow a reset signal to be applied externally.
The modules are organized as 2MBx32, 4MBx32 , 8MBx32, 16MBx32 and can access data in either 90 or 120ns.
All modules in this family are fabricated with eight layer printed circuit board (PCB) substrate construction and low-ESR decoupling capacitors for high reliability and low noise.

Tool Features:

JEDEC-Standard 80 pin Flash SIMM Module

Uses standard Intel 16-Mbit and 32-Mbit flash devices, with 5V only at the card edge (VPP generated on board)

Fast 90 or 120ns read access time

3.3V or 5.0V operation (+/- 10%)

No separate programming voltage required (generated on board)

Built-in write-protect reset during power changes (versions available for user-supplied reset signal)

Compact design - 1.25 inch height

TTL-compatible inputs and outputs

Low 550mW operating power (typical)

Ceramic decoupling capacitors at each Flash device

File Attachments:

SOLF_142.PDF - SolutionsFlash Memory Catalog Product Listing

Supported Device Detail Matrix:

Part & Package

28F016SA/SV - TSOP-56 ld

Vendor Information:

1st TECH Corporation

12201 Technology Boulevard, Suite 130
Austin , TX 78727
USA
(512) 258-3570

Email : firstech@mail.eden.com
Fax : (512) 258-3689

Contact the vendor above for the latest Distributor information