80C18xEC Pinout and Packaging Information

Pinout

Tables 3 and 4 list the pin names with package locations for the 100-pin Plastic Quad Flat Pack (PQFP) component. Figure 4 depicts the PQFP package as viewed from the top side of the component (i.e. contacts facing down).

Tables 5 and 6 list the pin names with package location for the 100-pin EIAJ Quad Flat Pack (QFP) component. Figure 5 depicts the QFP package viewed from the top side of the component (i.e. contacts facing down).

Tables 7 and 8 list the pin names with package location for the 100-pin Shrink Quad Flat Pack (SQFP) component. Figure 6 depicts the SQFP package as viewed from the top side of the component (i.e. contacts facing down).

Table 3. PQFP Pin Functions with Location

Table 4. PQFP Pin Locations with Pin Name

Note:
This is the FPO number location (indicated by X's).

Figure 4. 100-pin Plastic Quad Flat Pack Package )PQFP)

Table 5. PQFP Pin Names with Package Location

Table 6. QFP Package Location with Pin Names

Note:
This is the FPO number location (indicated by X's).

Figure 5. Quad Flat Pack (EIAJ) Pinout Diagram

Table 7. SQFP Pin Functions with Location

Table 8. SQFP Pin Locations with Pin Names

Note:
This is the FPO number location (indicated by X's)
Figure 6. 100-Pin Shrink Quad Flat Pack Package (SQFP)

Symbol List for Plastic Quad Flatpack Family

Symbol	Description
N	Leadcount
A	Package Height
A1	Standoff
D, E	Terminal Dimension
D1, E1	Package Body
D2, E2	Bumper Distance
D3, E3	Foot Print
D4, E4	Foot Radius Location
L1	Foot Length

Notes:
1. All dimensions and tolerances conform to ANSI Y14,GM-1982.
2. Datum plane -H- located at the mold parting line and coincident with the bottom of the lead where lead exits plastic
3. Datums A-B and -D- to be determined where center leads exit plastic body at datum plane -H-.
4. Controlling Dimension, inch.
5. Dimensions D1, D2, E1 and E2 are measured at the mold parting line. D1 and E1 do not include an allowable rr protrusion of 0.25 mm (0.010 in) per side. D2 and E2 do not include a total allowable mold protrusion of 0.25 mm (0.010) at maximum package size.
6. Pin 1 indentifier is located within one of the two zones indicated.
7. Measured at datum plane -H-.
8. Measured at seating plane datum -C-.

Packaging Family Attributes
Category	Plastic Quad Flatpack
Acronym	PQFP
Lead Configuration	Gull-Wing
Lead Counts	84, 100, 132, 164, 196
Lead Finish	SolderPlate
Lead Pitch	0.025"
Board Assembly Type	Surface or Socket Mount

Plastic Quad Flatpack (PQFP) 0.025 inch (0.635mm) Pitch
Symbol	Description	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
N	Leadcount	84		100		132		164		196
A	Package Height	0.160	0.180	0.160	0.180	0.160	0.180	0.160	0.180	0.160	0.180
A1	Standoff	0.020	0.040	0.020	0.040	0.020	0.040	0.020	0.040	0.020	0.040
D, E	Terminal Dimension	0.770	0.790	0.870	0.890	1.070	1.090	1.270	1.290	1.470	1.490
D1, E1	Package Body	0.647	0.653	0.747	0.753	0.947	0.953	1.147	1.153	1.347	1.353
D2, E2	Bumper Distance	0.797	0.803	0.897	0.903	1.097	1.103	1.297	1.303	1.497	1.503
D3, E3	Lead Dimension	0.500 REF		0.600 REF		0.800 REF		1.000 REF		1.200 REF
D4, E4	Foot Radius Location	0.723	0.737	0.823	0.837	1.023	1.037	1.223	1.237	1.423	1.437
L1	Foot Length	0.020	0.030	0.020	0.030	0.020	0.030	0.020	0.030	0.020	0.030
INCH

Symbol	Description	Min	Max	Min	Max	Min	Max	Min	Max	Min	Max
N	Leadcount	84		100		132		164		196
A	Package Height	4.06	4.57	4.06	4.57	4.06	4.57	4.06	4.57	4.06	4.57
A1	Standoff	0.51	1.02	0.51	1.02	0.51	1.02	0.51	1.02	0.51	1.02
D, E	Terminal Dimension	19.56	20.07	22.01	22.61	27.18	27.69	32.26	32.77	37.34	37.85
D1, E1	Package Body	16.43	16.59	18.97	19.13	24.05	24.21	29.13	29.29	34.21	34.37
D2, E2	Bumper Distance	20.24	20.39	22.78	22.93	27.86	28.01	32.94	33.09	38.02	38.18
D3, E3	Lead Dimension	12.70 REF		15.24 REF		20.32 REF		25.40 REF		30.48 REF
D4, E4	Foot Radius Location	18.36	18.71	20.90	21.25	25.89	26.33	31.06	31.41	36.14	36.49
L1	Foot Length	0.51	0.76	0.51	0.76	0.51	0.76	0.51	0.76	0.51	0.76
mm

Figure 1. Principal Dimensions and Datums

Figure 2. Molded Details

Figure 3. Terminal Details

Figure 4. Typical Lead

Figure 5. Detail M

Letter or Symbol	Description of Dimensions
N	Lead Count
A	Overall Height
A₁	Stand Off
AAA	Lead True Position
B	Lead Width
C	Lead Thickness
D	Terminal Dimension
D₁	Body Package
E	Terminal Dimension
E₁	Body Package
e₁	Lead Pitch
L₁	Foot Length
T	Lead Angle
Y	Coplanarity

Note:
4. Not all packages are available with all products. Contact local FSE for further package information.

Packaging Family Attributes
Category	Quad Flatpack
Acronym	QFP, SQFP, TQFP
Lead Configuration	Quad
Lead Counts	QFP 44, 48, 64, 80, 100, 128, 160 - SQFP 80, 100, 208 - TQFP 144, 176
Lead Finish	SolderPlate
Lead Pitch	0.5, 0.65, 0.8 mm
Board Assembly Type	Socket and Surface Mount

Note:
1. QFP - Alloy 42/copper on some lead frames. SQFP/TQFP copper lead frames only.
2. Novalac body.
3. Not all packages are available with all products. Contact local FSE for further package information.

Shrink Quad Flatpack
Symbol	Description	Min	Nom	Max	Min	Nom	Max	Min	Max
N	Lead Count	80			100			208
A	Overall Height			1.68			1.66	3.25	3.75
A₁	Stand Off	0.00			0.00			0	0.30
b	Lead Width	0.14	0.20	0.26	0.14	0.20	0.26	0.14	0.26
c	Lead Thickness	0.117	0.127	0.177	0.117	0.127	0.177	0.150	0.188
D	Terminal Dimension	13.70	14.00	14.30	15.70	16.0	16.30	30.2	31.0
D₁	Package Body		12.0			14.0		27.9	28.1
E	Terminal Dimension	13.70	14.0	14.30	15.70	16.00	16.30	30.2	31.0
E₁	Package Body		12.0			14.0		27.9	28.1
e₁	Lead Pitch	0.40	0.50	0.60	0.40	0.50	0.60	0.40	0.60
L₁	Foot Length	0.35	0.50	0.70	0.30	0.50	0.70	0.30	0.70
T	Lead Angle	0.0*		10.0*	0.0*		10.0*	0.0*	10.0*
Y	Coplanarity			0.10			0.10	0.1

Thin Quad Flatpack
Symbol	Description	Min	Max	Min	Max
N	Lead Count	144		176
A	Overall Height	1.3	1.7	1.3	1.7
A₁	Stand Off	0	0.20	0	0.20
b	Lead Width	0.16	0.28	0.16	0.28
c	Lead Thickness	0.122	0.160	0.122	0.160
D	Terminal Dimension	21.6	22.4	25.6	26.4
D1	Package Body	19.9	20.1	23.9	24.1
E	Terminal Dimension	21.6	22.4	25.6	26.4
E₁	Package Body	19.9	20.1	23.9	24.1
e₁	Lead Pitch	0.40	0.60	0.40	0.60
L₁	Foot Length	0.40	0.80	0.40	0.80
T	Lead Angle	0.0	10.0	0.0	10.0
Y	Cooplanarity	0.1		0.1

Note:
1. Dimensions are in millimeters.

Figure 3. Principle Dimensions and Data for QFP (Rectangular) Packages

Quad Flatpack (Rectangular Packages)
Symbol	Description	Min	Nom	Max	Min	Nom	Max
N	Lead Count	80			100
A	Overall Height			3.15			3.15
A₁	Stand Off	0.00			0.00
b	Lead Width	0.25	0.35	0.45	0.20	0.30	0.40
c	Lead Thickness	0.10	0.15	0.20	0.10	0.15	0.20
D	Terminal Dimension	17.5	17.9	18.3	17.5	17.9	18.3
D₁	Package Body		14.0			14.0
E	Terminal Dimension	23.5	23.9	24.3	23.5	23.9	24.3
E₁	Package Body		20.0			20.0
e₁	Lead Pitch	0.65	0.80	0.95	0.53	0.65	0.77
L₁	Foot Length	0.60	0.80	1.00	0.60	0.80	1.00
T	Lead Angle	0.0		10.0	0.0		10.0
Y	Coplanarity			0.10			0.10