MAX662A

Maxim Integrated Products

Architecture:
Type :
Last Update:

FLASH Value Series 100_Card
Voltage Converter
07/26/96 12:27:23 PM

Vendor Information

Tool Description:

The MAX662A is a 12V, 30mA flash memory programming power supply. It provides the necessary 12V+/-5% output to program Intel Flash memories, and needs no inductors to deliver a guaranteed 30mA output from inputs as low as 4.75V. This step-up voltage converter is the smallest and lowest-cost programming solution, and the first to eliminate inductors. The complete circuit fits into less than 0.1in€ and requires only a few inexpensive, tiny capacitors.
A logic-level programming control input interfaces directly with microprocessors. Quiescent current is 185ÁA when on, and only 1ÁA when off.
The MAX662A is available in the commercial (0€C to +70€C), extended industrial (-40€C to +85€C), and military (-55€C to +125€C) temperature ranges. It comes in 8-lead SOIC, DIP, and CERDIP packages. The MAX662AEVKIT-SO is a complete pre-assembled evaluation kit that saves hours of component gathering and board design time.

Tool Features:

Entire circuit fits in 0.1in€

Requires no inductors

Uses only 4 small, low-cost capacitors

1ÁA logic-controlled shutdown

Guaranteed 12V+/-5% output

40mA output (30mA guaranteed)

4.75V to 5.5V input range

Available in C, E, and M temperature ranges

Pre-assembled evaluation kit (MAX662AEVKIT-SO)

File Attachments:

SOLF_176.PDF - SolutionsFlash Memory Catalog Product Listing

Supported Device Detail Matrix:

Part & Package

IMC002FLSC - Type 1
IMC004FLSC - Type 1
IMC008FLSC - Type 1

Vendor Information:

Maxim Integrated Products

120 San Gabriel Drive
Sunnyvale , CA 94086
USA
(408) 737-7600

Fax : (408) 737-7194
URL : http://www.maxim-ic.com

Contact the vendor above for the latest Distributor information

	Part & Package
	IMC002FLSC - Type 1 IMC004FLSC - Type 1 IMC008FLSC - Type 1