FlashPRO-II software:  FLSHPRO2.EXE version 1.0

FPRO2ZIP.EXE is a self-extracting compressed file. It yields the following files:

FPRO2.EXE
FPRO2.DAT
FPRO2.INI
FPRO2.HLP
HELP.EXE.

You must be in a DOS environment and have at least 1MB of available hard disk space.

When first started, FLSHPRO2 creates a 128KB virtual buffer (FPRO2.VIR) on your hard disk. This start-
up size is changed by editing the DMEM setting in FPRO2.INI.

When communication is first established between FLSHPRO2 and FlashPRO-II, the file FPRO2.IOP is 
created  to store the port base address. FLSHPRO2 will attempt to find FlashPRO-II, searching I/O ports 
normally used for printers. If unsuccessful FLSHPRO2 will prompt for a port base address.

FLSHPRO2 can be used in demo mode. Do so by hitting <ENTER> at the port base address prompt.

If updating from an earlier version, FLSHPRO2 will prompt before overwriting each of the existing files. 
Select 'NO' for FPRO2.INI so custom macros, file definitions, memory settings and color definitions are 
not overwritten. Select 'NO' for FPRO2.IOP so a non-standard port base address is not overwritten.

Revision History:
1.0 Original Version