FlashPRO software:  iFLASH3.EXE version 1.4

iFL3ARC.EXE is a self-extracting compressed file. It yields the following files:

iFLASH3.EXE
iFLASH3.DAT
iFLASH3.INI
iFLASH3.HLP
HELP.EXE.

You must be in a DOS environment and have at least 1MB of available hard disk space.

When first started, iFLASH3 creates a 128KB virtual buffer (iFLASH3.VIR) on your hard disk. This start-
up size is changed by editing the DMEM setting in iFLASH3.INI.

When communication is first established between iFLASH3 and FlashPRO, the file iFLASH3.IOP is 
created  to store the port base address. iFLASH3 will attempt to find FlashPRO, searching I/O ports 
normally used for printers. If unsuccessful iFLASH3 will prompt for a port base address.

iFLASH3 can be used in demo mode. Do so by hitting <ENTER> at the port base address prompt.
If updating from an earlier version, iFLASH3 will prompt before overwriting each of the existing files. 
Select 'NO' for iFLASH3.INI so custom macros, file definitions, memory settings and color definitions are 
not overwritten. Select 'NO' for iFLASH3.IOP so a non-standard port base address is not overwritten.

Revision History:
1.0 Original Version
1.1 Adds E28F400CV/E, E28F008BV/E, PA28F800BV, E28F800CV/E
1.2 Adds E28F002BC, E28F008SC, Series 2/2+/VS100 FlashCards, 28F016XD-based SIMMs
1.3 Adds E28F002BE, E28F200CE, PA28F002BC, PA28F008SC
1.4 Adds E/PA28F008S5, E/PA28F200B5, E/PA28F400B5, E/PA28F800B5